- This topic has 1 reply, 1 voice, and was last updated 9 months, 3 weeks ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Jeff Brenhaug ( @hueychief) has been hard at work building the Thrust Attenuator for the BD5J, with the components water jet cut from stainless steel.
Jeff Brenhaug ( @hueychief) did a test bend on some extra pieces made specifically to get the roller and bending jig marks set. He reported that they turned out pretty good.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.